Acer P5205, S5200 User Manual

First Thing First

First Thing First

viii

First Thing First

Usage Notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display 
housing.

Disconnect the power plug from AC outlet if the product is not being used 
for a long period of time.

Don't:

Block the slots and openings on the projector provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this 
user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt 
your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or 
moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow the projector to cool down, and follow all 
changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp 
when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" 
menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling 
cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud 
popping sound. If this happens, the projector will not turn back on until the lamp 

module has been replaced. To replace the lamp, follow the procedures listed under 

"Replacing the Lamp".