Connect the projector to your PC or notebook with a
USB cable prior to using the paging function. See
"Connecting a computer" on page 23
You can operate your display software program (on a
connected PC) which responds to page up/down
commands (like Microsoft PowerPoint) by pressing
on the remote control.
If remote paging function doesn't work, check if the
USB connection is correctly made and the mouse
driver on your computer is updated to the latest
Hiding the image
In order to draw the audience's full attention to the
presenter, you can use BLANK on the projector or
remote control to hide the screen image. Press any key
on the projector or remote control to restore the
image. The word 'BLANK' appears at the screen while
the image is hidden. When this function is activated
with an audio input connected, the audio can still be
You can set the blank time in the
Basic > Operation Settings > Blank Timer
to let the projector return the image
automatically after a period of time when there is no action taken on the blank screen. The
length of time can be set from 5 to 30 minutes in 5-minute increments.
Do not block the projection lens from projecting as this could cause the blocking object to
No matter Blank Timer is activated or not, you can press any key (except the
key) on the projector or remote control to restore the picture.
Freezing the image
Press FREEZE on the remote control to freeze the
image. The word 'FREEZE' will display in the screen.
To release the function, press any key (except the
key) on the projector or remote
Even if an image is frozen on the screen, the pictures
are running on the video or other device. If the
connected devices have active audio output, you will
still hear the audio even though the image is frozen on
Utilizing FAQ function
The INFORMATION menu contains possible solutions to problems encountered by users
regarding image quality, installation, special feature operation and service information.
To get the FAQ information: