Epson ActionPrinter L-1000 User Manual

the READY, the ON LINE, then, the section

the READY, the ON LINE, then, the section

Problems and Solutions
The printer stops printing
l
The printer may be out of paper. Check the paper supply.
l
The paper may be jammed. Remove the jammed paper and
reload.
l
The ribbon may be jammed. See the section on replacing the
ribbon later in this chapter.
l
If 
the READY 
light is off and 
the ON LINE 
light is flickering, the
printer 
has 
stopped to allow the print head to cool. Printing
resumes soon; you do not have to do anything to restart it.
l
If the printer stops, the beeper sounds, and the 
ON LINE 
light
does 
not 
flicker, turn the printer off and 
then 
turn it back on
and try to print again. If 
the 
printer beeps again and does not
print, take it to a qualified service person.
Single sheets do not feed properly
l
The position of the paper release lever may be wrong. Push it
back to the single-sheet position.
l
The paper may be too large or too small. See the printer’s paper
specifications in Chapter 5.
l
The paper guide 
may 
not be installed properly. See 
the section
on installing the paper guide in Chapter 2.
l
The cut sheet feeder mode may be selected by the DIP switch.
See 
the 
section on setting DIP switches in Chapter 3.
4-4
Troubleshooting and Maintenance