Fuji Xerox DocuCentre-IV 2060, DocuCentre-IV 3060, DocuCentre-IV 3065 Administrator Guide

Paper Jams in Trays 1 to 4, Paper Jams in Tray 3 When Tandem Tray Module is Installed

Paper Jams in Trays 1 to 4, Paper Jams in Tray 3 When Tandem Tray Module is Installed

15 Problem Solving
494
P
r
oblem S
o
lv
ing
15
Paper Jams in Trays 1 to 4
The following describes how to clear paper jams occurring in Trays 1 to 4.
Note
• When the Envelope Tray (optional) is inserted into the slot for Tray 1, you can follow the 
steps below and clear paper jams occurring in the Envelope Tray.
1
Pull out the tray until it stops where the 
paper jam occurred.
Important • Be sure to check the message displayed 
on the operation panel and see where the 
paper jam is occurring before pulling the 
paper tray.  If you pull the paper tray 
without checking the paper jam location, 
the jammed paper could be torn and left 
left inside the machine. This may cause 
the machine to malfunction.  
2
Remove the jammed paper.
Note
• If the paper is torn, make sure no piece of 
paper remains inside the machine.
3
Verify the position of the paper guide.
4
Push the tray in gently until it stops.
Paper Jams in Tray 3 (When Tandem Tray Module is Installed)
The following describes how to clear paper jams occurring in Tray 3 when the Tandem 
Tray Module is installed.
1
Pull out Tray 3.
Important • If you pull out a paper tray without 
checking the paper jam location, the 
jammed paper may be torn and the 
pieces may remain inside the machine. 
This may cause machine malfunctions; 
therefore, always check where the paper 
jam occurred first.
2
Remove the jammed paper.
Note
• If the paper is torn, make sure no piece of 
paper remains inside the machine.
3
Push the tray in gently until it stops.