JVC RX-5042S, RX-6042S Instruction Manual

AV COMPU LINK Remote Control System

AV COMPU LINK Remote Control System

31
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player)
through the receiver.
RX-5042S is equipped with conventional AV COMPU LINK, while RX-6042S is equipped
with the AV COMPU LINK-III, which adds a function to operate JVC’s video components
through the component video jacks.
To use this remote control system, connect the video components you want to operate,
following the diagrams below and the procedure on the next page.
CONNECTIONS 1: AV COMPU LINK Connection
CAUTION:
You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK-III jack.
DO NOT connect to the TV with AV COMPU LINK RECEIVER/AMP jack.
Notes:
• For RX-6042S: When connecting the receiver and a TV with the AV COMPU LINK EX jack by using a component video cable, you cannot use
automatic selection of TV’s input mode (see page 32).
• Make sure that the remote control code for the connected VCR is set to code “A.”
• When connecting only the VCR or DVD player to the receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
Connect the VCR and/or DVD player to the TV using one of the following methods:
• For RX-6042S: When using the AV COMPU LINK remote control system, set the component video input for the DVD player and
the VCR correctly (see “Setting the Component Video Input” on page 22); otherwise, the correct input for this receiver will not be selected
on the TV.
When connecting the source equipment to the receiver through the S-video jacks, connect the receiver
to the TV’s video input 1 jack (S-video input) using S-video cables.
When connecting the source equipment to the receiver through the composite video jacks, connect
the receiver to the TV’s video input 2 jack (composite video input) using composite video cables.
When connecting the source equipment to the receiver through the component video jacks, connect
the receiver to the TV’s video input 2 jack (component video input) using component video cables.
Source
equipment
This receiver
TV
To video input 1
S-video cable
S-video cable
Source
equipment
TV
To video input 2
Composite
video cable
Composite
video cable
Source
equipment
TV
To video input 2
Component
video cable
Component
video cable
VCR
DVD player
TV
This receiver
This receiver
(Only for
RX-6042S)
CASE 2
CASE 1
CASE 3
AV
COMPU LINK 
AV
COMPU LINK – III
RX-5042S
RX-6042S
AV
COMPU LINK
VHS
AV
COMPU LINK
AV
COMPU LINK EX
DVD
AV
COMPU LINK-
ΙΙΙ
This receiver
(Only for
RX-6042S)
31-38_5042&6042[A]2.p65
04.3.26, 6:34 PM
31