JVC GR-DF470, GR-DF570 Instruction Manual

Power

Power

EN
 13
GETTING STARTED
MasterPage: Start_Right
GETTING
 ST
AR
TED
How To Attach The Core Filter
Attach the core filters to the cables. The core 
filter reduces interference.
1
Release the stoppers on both ends of the 
core filter.
2
Run the cable through the core filter, leaving 
approx. 3 cm of cable between the cable plug 
and the core filter. 
Wind the cable once around the outside of the 
core filter as shown in the illustration.
3
Close the core filter until it clicks shut. 
NOTES:
● Take care not to damage the cable.
● When connecting a cable, attach the end with the 
core filter to the camcorder. 
This camcorder’s 2-way power supply system 
lets you choose the most appropriate source of 
power. Do not use provided power supply units 
with other equipment.
Charging The Battery Pack
1
Set the Power Switch to “OFF”.
2
With the arrow on the battery pack pointing 
right, push the battery pack slightly against the 
battery pack mount 
a.
3
Slide the battery pack to the right until it locks 
in place
b.
4
Connect the AC Adapter to the camcorder.
5
Connect the Power Cord to the AC Adapter 
(AP-V14E only).
6
Plug the AC Adapter into an AC outlet. The 
POWER/CHARGE lamp on the camcorder 
blinks to indicate charging has started.
7
When the POWER/CHARGE lamp goes out, 
charging is finished. Unplug the AC Adapter 
from the AC outlet. Disconnect the AC Adapter 
from the camcorder.
Stopper
3 cm
Wind once.
Core filter
Power
Arrow
BATT. RELEASE
Battery pack mount
Battery pack
POWER/CHARGE
lamp
Power switch
To AC outlet
mark
To 
DC connector
AC Adapter 
(ex. AP-V14E)
Open the cover.
Power cord
CONTINUED ON NEXT PAGE
GR-DF570_470PAL.book  Page 13  Monday, January 17, 2005  8:27 PM