JVC GR-DF470, GR-DF570 Instruction Manual

Normal Playback

Normal Playback

22 
EN
MasterPage: Left
VIDEO PLAYBACK
1
Load a cassette. (
੬ pg. 17)
2
Set the VIDEO/MEMORY Switch to “VIDEO”.
3
Set the Power Switch to “PLAY” while 
pressing down the Lock Button located on the 
switch.
4
To start playback, press 4/9.
5
To stop playback, press 8.
● During Stop mode, press 3 to rewind, or 5 
to fast-forward the tape.
To control the speaker volume
Slide the Power Zoom Lever (VOL. +/–) towards 
“+” to turn up the volume, or towards “–” to turn 
down the volume.
NOTES:
● The playback picture can be viewed in the LCD 
monitor, viewfinder or on a connected TV. 
(
੬ pg. 23)
● If Stop mode continues for 5 minutes when power 
is supplied from a battery, the camcorder shuts off 
automatically. To turn on again, set the Power 
Switch to “OFF”, then to “PLAY”.
● When a cable is connected to the AV connector, 
the sound is not heard from the speaker.
Still Playback
Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 
again.
● If still playback continues for more than about 
3 minutes, the camcorder’s Stop mode is 
automatically engaged.
Shuttle Search
Allows high-speed search in either direction 
during video playback.
1) During playback, press 5 for forward 
search, or 3 for reverse search.
2) To resume normal playback, press 4/9.
● During playback, press and hold 5 or 3. The 
search continues as long as you hold the button. 
Once you release the button, normal playback 
resumes.
● A slight mosaic effect appears on the display 
during Shuttle Search. This is not a malfunction.
ATTENTION:
During Shuttle Search, parts 
of the picture may not be 
clearly visible, particularly on 
the left side of the screen.
Blank Search
Helps you find where you should start recording 
in the middle of a tape to avoid time code 
interruption. (
੬ pg. 21)
1
Load a cassette. (
੬ pg. 17)
2
Set the VIDEO/MEMORY Switch to “VIDEO”.
3
Set the Power Switch to “PLAY” while 
pressing down the Lock Button located on the 
switch.
4
Press MENU. The Menu Screen appears.
5
Press MENU to select “t”. The VIDEO 
Menu appears.
6
Press   or   to select “BLANK SRCH”, and 
press SET. The Sub Menu appears.
7
Press   or   to select “EXECUTE”, and press 
SET.
● The “BLANK SEARCH” indication appears and 
the camcorder automatically starts reverse or 
forward search, then stops at the spot which is 
about 3 seconds of tape before the beginning of 
the detected blank portion.
● To cancel Blank Search midway, press 8.
Normal Playback
VIDEO/
MEMORY
MENU
4
/9
/
8/
3
5
Speaker
Power Switch
Lock Button
VOL. +/–
SET
GR-DF570_470PAL.book  Page 22  Monday, January 17, 2005  8:27 PM