JVC GR-DF470, GR-DF570 Instruction Manual

Initialising A Memory Card

Initialising A Memory Card

ADDITIONAL FEATURES FOR D.S.C.
36 
EN
MasterPage: Left
To Reset The Number Of Prints
1
Perform steps 
1 – 3 in “To Print All Still 
Images (One Print For Each)”.
2
Press   or   to select “RESET”, and press 
SET. The DPOF screen appears.
3
Press   or   to select “EXECUTE”, and press 
SET. The normal playback screen appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still 
images.
CAUTION:
While performing the above, never disconnect 
power, as this may cause the memory card to be 
corrupted. 
You can initialise a memory card any time.
After initialising, all files and data stored in the 
memory card, including those which have been 
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to 
“MEMORY”.
2
Set the Power Switch to “PLAY” while 
pressing down the Lock Button located on the 
switch.
3
Press MENU. The Menu Screen appears.
4
Press  
or  
to 
select 
“FORMAT”, and press 
SET. The FORMAT 
screen appears.
5
Press  
or  
to 
select 
“EXECUTE”, and press 
SET. The memory card is 
initialised.
● When initialisation is finished, “NO IMAGES 
STORED” or “NO E-MAIL CLIP STORED” 
appears.
● To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as 
turning off the camcorder) during initialisation. 
Also, be sure to use the provided AC Adapter, as 
the memory card may be corrupted if the battery 
becomes exhausted during initialisation. If the 
memory card becomes corrupted, initialise it.
Initialising A Memory Card
ORMAT
F
EXECUTE
DATA?
EX I ST I NG
ERASE AL L
RETURN
GR-DF570_470PAL.book  Page 36  Monday, January 17, 2005  8:27 PM