JVC GR-DF470, GR-DF570 Instruction Manual

Connection To A Personal Computer

Connection To A Personal Computer

EDITING
54 
EN
MasterPage: Left
To use this camcorder as a player
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit 
equipped with a DV input connector using a DV 
cable as shown in the illustration.
3
Start playback on the camcorder. (
੬ pg. 22)
4
At the point you want to start dubbing, start 
recording on the video unit. (Refer to the video 
unit’s instruction manual.)
5
To stop dubbing, stop recording on the video 
unit, then stop playback on this camcorder.
NOTES:
● It is recommended to use the AC Adapter as 
the power supply instead of the battery pack. 
(
੬ pg. 15)
● If a blank portion or disturbed image is played 
back on the player during dubbing, the dubbing 
may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly, 
sometimes the image may not appear in step 
4. If 
this occurs, turn off the power and make 
connections again.
● If “Playback Zoom” (੬ pg. 27) or “Playback 
Special Effects” (
੬ pg. 27) is attempted or 
SNAPSHOT is pressed during playback, only the 
original playback image recorded on the tape is 
output from the DV IN/OUT connector.
● When using a DV cable, be sure to use the 
optional JVC VC-VDV204U DV cable.
To use this camcorder as a recorder
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit 
equipped with a DV output connector using a DV 
cable as shown in the illustration.
3
Set the camcorder’s Power Switch to “PLAY”.
4
Set “REC MODE” to “SP” or “LP”. (
੬ pg. 42)
5
Press the Recording Start/Stop Button to 
engage the Record-Pause mode.
● The “
” indication appears on the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press 
the Recording Start/Stop Button to start 
dubbing. The 
 indication rotates.
8
Press the Recording Start/Stop Button again 
to stop dubbing. The 
 indication stops 
rotating.
9
Press 8 to return to the normal playback 
mode.
NOTES:
● If no image is displayed on the LCD monitor, set 
“S/AV INPUT” to “OFF”. (
੬ pg. 37, 42)
● Digital Dubbing is performed in the sound mode 
recorded on the original tape, regardless of the 
current “SOUND MODE” setting. (
੬ pg. 38) 
DV IN
Connection To A Personal Computer
[A] Using USB cable
To USB
PC
PC with DV connector
USB cable 
(provided)
To DV IN/OUT
[B] Using DV cable
To USB 
connector
To DV connector
Core filter
Core filter
DV cable 
(optional)
OR
GR-DF570_470PAL_07Advanced.fm  Page 54  Tuesday, January 18, 2005  1:21 AM